Subject to changes in line with technical progress!
115
3468161
Servicing and maintenance
Fig. 69 Loosen and reconnect the equipotential bonding connection on the droplet eliminator
7.3.6.1 Maintenance
Inspect the droplet eliminator for soiling, damage and corrosion.
Inspect the water drain and odour trap.
Check water drain and siphon of the drain tray and top up if necessary.
Check integration of the droplet eliminator into the unit equipotential bonding.
ATTENTION
During installation of the pipelines on site, ensure that the droplet eliminator can still be pulled
out to the side.
7.3.6.2 Cleaning
Clean the droplet eliminator and condensate collecting pan using compressed air, water, steam or grease-dissolving
cleaning agents.
Summary of Contents for AT4F Series
Page 138: ...Translation of original operating instructions 138 AL KO AT4F ATEX Notes...
Page 139: ......
