manualshive.com logo in svg

Akai DPS12, Operator'S Manual, Page: 51 / 156

Share
Download
Akai DPS12 Operator'S Manual Download Page 51

39

Chapter 3: Transport/Locate operation

Recording

—

Recording is cancelled,
and normal playback
resumes (Punch out).
The LED lights up.

Stops.

—

—

Playing back

Pressing the [REC]
button while holding
down the [ 

 ] button

causes the DPS12 to
start recording (Punch
in). The LED lights up.

—

Stops.

Rewinds while playing
back sound (review).

Fast forward while
playing back sound (cue).

Stop

Pressing the [REC]
button while holding
down the [ 

 ] button

causes the DPS12 to
start recording. The LED
lights up.

Normal playback
resumes. The LED lights
up.

—

Normal rewind.

Normal fast forward.

Rewind

—

Playback
starts.

Stops.

Rewind at
higher speed.

Switches to
fast forward.

Chapter 3: Transport/Locate operation

This chapter describes the transport and locate operations of the DPS12.

Transport operation

You may perform locate operations and shuttle playback using the 

[JOG]

 and 

[SHUTTLE]

 dials, and part playback

using the 

[TO]

 and 

[FROM]

 keys, as well as the usual transport operations using the transport buttons.

Transport button operation

GO TO

LOCATE

MEMORY

The following table includes operational information for each transport button.

REC

Using the [JOG] dial and the [SHUTTLE] dial

[JOG] dial

JOG PLAY

[SHUTTLE] dial

[JOG PLAY] key

Using the 

[JOG]

 dial and the 

[SHUTTLE]

 dial enables you to play back data at the desired speed.

Fast

Forward

—

Playback
starts.

Stops.

Switches to
rewind.

Fast forward
at higher
speed.

Summary of Contents for DPS12





























































































































































Reviews:

No comments