manualshive.com logo in svg

Akai DPS12, Operator'S Manual, Page: 125 / 156

Share
Download
Akai DPS12 Operator'S Manual Download Page 125

113

Chapter 12: MIDI applications

Synchronizing the DPS12 to an external device (MTC)

In this example, the DPS12 is used as a sync slave device. MTC (MIDI timecode) is supplied from an external
MIDI sequencer or computer-based sequence software to the DPS12, which will synchronize to the MIDI se-
quencer operation. This method is useful when you are using a device that cannot be used as a slave device in the
sync system (such as an analog MTR).

1. Use a MIDI cable to connect the DPS12’s MIDI IN jack and the MIDI sequencer’s MIDI OUT jack.

INPUT

DIGITAL PERSONAL STUDIO

dps12

INPUT GAIN

DPS12

MIDI OUT

MTC

MIDI IN

MIDI sequencer

2. Move the cursor to the 

SLCT:

 field, then turn the [JOG] dial to recall the SYNC Control Panel.

3. Move the cursor to the  

Type

 field, and turn the [JOG] dial to select  

MTC/SLAVE

.

4. Press the [F6] key to set the 

SYNC

 field to 

ON

.

5. To change the frame rate of the MTC (default = 30, non-drop), move the cursor to the 

SLCT:

 field,

turn the [JOG] dial to recall the TIME DISPLAY Control Panel.

6. Move the cursor to the 

Frame rate:

 field, and set the frame rate of the MTC to the rate of the

syncing device. Options are 

24

, 

25

, 

30

 (30, non-drop), 

29.97

, 

30D

 (30, drop).

7. Press the DPS12’s PLAY button.

The following window appears.

Summary of Contents for DPS12





























































































































































Reviews:

No comments