Akai DPS12, Operator'S Manual, Page: 148 / 156

136
Chapter 13: Using the effects
Parameter Setting range Function
1 LDelay 1 – 1500ms Adjusts the delay time of the L channel.
2 Fdback 0 – 127 Adjusts the amount of delay that is fed back.
3 HFdamp 20Hz – 20kHz Sets a frequency at which the higher range of the feedback sound is cut.
4 RDelay 1 – 1500ms Adjusts the delay time of the R channel.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.
TAPE ECHO (G)
This delay effect simulates a three-head tape echo machine. You can set three delay times individually.
4
1
3
B
5
6
Parameter Setting range Function
1 Head1 1 – 1500ms Adjusts the delay time of Delay1.
2 Head2 1 – 1500ms Adjusts the delay time of Delay2.
3 Head3 1 – 1500ms Adjusts the delay time of Delay3.
4 Fdback 0 – 127 Adjusts the amount of delay that is fed back.
5 HFdamp 20Hz – 20kHz Sets a frequency at which the higher range of the feedback sound is cut.
6 Pan L63 – MID – R63 Adjusts the stereo image of the effect sound.
REVERB>SMALL ROOM (Small Room Reverb) (G)
This reverb effect simulates reverberations in a small room.
4
1
3
B
5
Parameter Setting range Function
1 Pre-D 1 – 100ms Adjusts the delay time of early reflections.
2 Time 0.1 – 10sec Adjusts the time of attenuation of reverberation.
3 Diff 0 – 127 Adjusts the density of reverberation.
4 HFdamp 20Hz – 20kHz Adjusts a high-frequency damp (the high range is attenuated) of reverbera-
tion.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.
REVERB>BIG ROOM (Big Room Reverb) (G)
This reverb effect simulates reverberations in a big room.
4
1
3
B
5