manualshive.com logo in svg

Akai DPS12, Operator'S Manual, Page: 120 / 156

Share
Download
Akai DPS12 Operator'S Manual Download Page 120

108

Chapter 11: Using a disk

4. Select  

FORMAT

 (or 

ERASE

)  in the  

Format operation

 field.

5. Press the 

DO IT

 [F5] key. The following window appears to confirm the operation.

6. Press the 

DO IT

 [F5] key.

After formatting or erasing the destination disk, the copy operation is executed. When the operation is com-
plete, the DPS12 returns to the DISK SETUP screen.

✐

TIP : 

Press the 

CANCEL

 

[F2]

 key to cancel the operation.

➸

NOTE :

• Make sure that the available space of the destination disk is larger than the size of the copy data. If it is

smaller, an error message appears indicating that you cannot execute the copy operation. Also, you
cannot copy two or more disks at a time, even if you specify a copy destination disk that has a large free
space.

• Once the FORMAT operation is started, the function will not be canceled until the Format operation is

finished.

Using a removable drive

A

B

1

If a removable drive is connected, but the disk is not inserted, 

REC NOT READY

 appears. If the disk is

inserted, 

REC READY

 or  

NOW SELECTED

 appears.

2

Pressing the 

EJECT

 

[F6]

 key will eject a removable disk from the drive.

Summary of Contents for DPS12





























































































































































Reviews:

No comments