Akai DPS12, Operator'S Manual, Page: 149 / 156

137
Chapter 13: Using the effects
Parameter Setting range Function
1 Pre-D 1 – 100ms Adjusts the delay time of early reflections.
2 Time 0.1 – 10sec Adjusts the time of attenuation of reverberation.
3 Diff 0 – 127 Adjusts the density of reverberation.
4 HFdamp 20Hz – 20kHz Adjusts a high-frequency damp (the high range is attenuated) of reverbera-
tion.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.
REVERB>SMALL HALL (Small Hall Reverb) (G)
This reverb effect simulates reverberations in a small hall.
4
1
3
B
5
Parameter Setting range Function
1 Pre-D 1 – 100ms Adjusts the delay time of early reflections.
2
Time 0.1 – 10sec Adjusts the time of attenuation of reverberation.
3 Diff 0 – 127 Adjusts the density of reverberation.
4 HFdamp 20Hz – 20kHz Adjusts a high-frequency damp (the high range is attenuated) of reverbera-
tion.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.
REVERB>BIG HALL (Big Hall Reverb) (G)
This reverb effect simulates reverberations in a big hall.
4
1
3
B
5
Parameter Setting range Function
1 Pre-D 1 – 100ms Adjusts the delay time of early reflections.
2 Time 0.1 – 10sec Adjusts the time of attenuation of reverberation.
3 Diff 0 – 127 Adjusts the density of reverberation.
4 HFdamp 20Hz – 20kHz Adjusts a high-frequency damp (the high range is attenuated) of reverbera-
tion.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.