manualshive.com logo in svg

Akai DPS12, Operator'S Manual, Page: 116 / 156

Share
Download
Akai DPS12 Operator'S Manual Download Page 116

104

Chapter 11: Using a disk

2

0–7 (drive condition)

These fields indicate the current drive condition of each SCSI ID. You can also select a drive to operate. Each
field has the following meaning.

•

(no device)

................ No device is connected.

•

REC NOT READY

...... A device is detected, but you need to format it or erase data to use it. If no disk is

inserted in the removable drive, or a backup disk or unformatted disk is inserted,
this message appears.

•

REC READY

................ You can use this disk for recording on the DPS12. The disk has already been

formatted on the DPS12 in Disk mode.

•

NOW SELECTED

......... A formatted disk has been connected and selected as the current disk.

These indications are updated whenever you press the 

[DISK]

 key.

➸

NOTE : 

If  

(no device)

  appears even if an external SCSI device is connected, press the DISK key

again. If the same message appears again, turn off the power to the DPS12 and check the connections.

REC NOT READY

  appears if a backup disk (that the DPS12 cannot access directly) is connected.

3

This area indicates the functions assigned to the function keys in Disk mode.

•

INFORM

 

[F1]

 

key

..... Press to display current drive information.

•

FORMAT

 

[F2]

 

key

.... Press to erase or format the current disk.

•

ALIGN

 

[F3]

 

key

........ Press to arrange data on the current disk.

•

SELECT

 

[F4]

 

key

.... Press to select the current drive.

•

COPY

 

[F5]

 

key

......... Press to copy data from the current disk to a SCSI device.

Changing the current drive

The “current drive” refers to the a drive on which you record or play back. If you select an external hard disk as
the current drive, you can record and play audio data on the external hard disk.

➸

NOTE : 

Some types of hard disks may not be able to record or play. Consult AKAI Customer service for

information on compatible external hard disks.

Follow the steps below to change the current drive.

1. While the DISK SETUP screen is displayed, move the cursor to the SCSI ID number of the SCSI device

you wish to assign as the current drive.

Example: A drive with SCSI ID number 3 is selected.

Summary of Contents for DPS12





























































































































































Reviews:

No comments