Akai DPS12, Operator'S Manual, Page: 107 / 156

95
Chapter 9: Control Panel
OTHER (other setting)
You can set parameters related to the level meters and the Undo function.
A
B
In this Control Panel, you can toggle between pre and post faders for the level meter indication, and set how many
previous operations can be restored by the Undo function. The following parameters are available.
1
Meter (level meter indication)
This field enables you to select whether the level meters in Main mode and Mixer mode indicate the pre fader
levels or the post fader levels. Use the
[CURSOR]
key to move the cursor to this field, and turn the
[JOG]
dial
to switch between
PRE
(pre fader) and
POST
(post fader).
2 Undo level
This numeric field enables you to set the number of previous edits or recording operations that can be restored
by using the
[UNDO] key on the top panel. Use the [CURSOR] key to move the cursor to this field, and turn the
[JOG]
dial to set the level in the range of 0 to 250.
➸
NOTE : If you set the
Undo level
parameter to
0
, the [UNDO] key will be disabled. If you set the
Undo
level
parameter to
1
, pressing the [UNDO] key will restore the last (previous) edit or recording.
If you set the level too high, a large amount of disk space will be used to store the previous data when you
overdub or edit data. If there is not enough space on the disk, set the undo level to a lower value.