1
39
FS1 Installation and Operation Manual — 2.12 Audio Map Ch2
Note:
If parameter 4.5
Audio Follow Video
is set to
On
, then Audio Map Ch1 selection
is independently kept for each separate input:
SDI 1
,
SDI 2
,
Composite
,
S-Video
, and
Component
. If
Audio Follow Video
is set to
Off
, then another Audio Map Ch1 selection is
used. This note applies to Parameters 2.11 through 2.18.
2.12 Audio Map Ch2
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 2. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 2
.
2.13 Audio Map Ch3
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 3. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 3
.
2.14 Audio Map Ch4
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 4. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 4.
2.15 Audio Map Ch5
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 5. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 5
.
2.16 Audio Map Ch6
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 6. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 6
.
2.17 Audio Map Ch7
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 7. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 7
.
2.18 Audio Map Ch8
This parameter is used with parameter 2.2—when
Channel Map
is selected—to specify
the source of the audio output on channel 8. Possible choices are the same as
parameter 2.11.
Default
=
AES Ch 8
.
