Users Guide
Page
26
of
127
Printed for Reference Only on November 15, 2006
-
Work Hour
. From: The start time of working hour
. To: The end time of working hour
. The system will work by original camera setup for recording schedule.
-
After Hour
. The system will work by an advanced setup during the time outside the time zone established
as Work Hour.
-
On Alarm or Motion
. If you want to use motion or sensor recording during after hour
3.4. Recording Setting
: DVR has 6 different recording modes. User can choose one of the modes. The recording schedule is based
on one week. So User can define the schedule according to the Day and Time in each day.
1) Normal Mode
-
In this mode, system always will record all images from the selected camera.
2) Sensor Mode
-
In this mode, system will record the images only if any event occurs at the sensor.
-
If you select Event/Audio, system will record the images whether audio is detected or sensor
does.
3) Event/ Normal Mode
-
The system will be recorded each one frame per each setting second (1,2,3,,,20,30 max.).
-
But the system will be recording maximum frame rate when there is motion detection or sensor.
-
If you select Event/Audio, system will record the images whether audio is detected or sensor or
motion does.
4) Motion Mode
-
In this mode, system will record the images only if any motion is detected at the defined area.
(User can choose Whole area or define a specific area at the Camera Settings).
-
If you select Event/Audio, system will record the images whether audio is detected or motion
does.
5) Motion Sensor Mode
-
In this mode, system will record the images when the sensor event is occurred and /or the
Motion is detected.
-
If you select Event/Audio, system will record the images whether audio is detected or sensor or
motion does.
6) Watch Mode
-
In this mode, system will not record any images from the selected camera, but display the
captured image at the screen.
7) Audio Mode
-
In this mode, system will record the images only if audio occurs.
