manualshive.com logo in svg

AirLive SNMP-FSH2602MG V2, User Manual, Page: 80 / 139

Share
Download
AirLive SNMP-FSH2602MG V2 User Manual Download Page 80

5.  Console Management in SNMP-FSH2602MG v2 

 

 

 

75 

AirLive SNMP-FSH2602MG v2 User’s Manual

 

 

 
2. Select 

<Edit>

. 

3. 

VLAN Name:

 Type a name for the new VLAN, ex: VLAN01. 

4. 

VLAN ID:

 Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups 

to provided configure. 

5. 

Protocol VLAN:

 Press “

Space

”

 

key to choose protocols type. 

6. 

Member:

 Press “

Space

” key to change the member value. 

„

 

Untagged:

 this port is the member port of this VLAN group and outgoing frames 

are NO VLAN-Tagged frames. 

„

 

Tagged:

 this port is the member port of this VLAN group and outgoing frames are 

VLAN-Tagged frames. 

„

 

NO:

 it means that the port is NOT member of this VLAN group. 

7. Press 

“

ESC

” key to go back action menu line. 

8. Select 

<Save>

 to save the configuration.

   

 

Summary of Contents for SNMP-FSH2602MG V2












































































































































Reviews:

No comments