manualshive.com logo in svg

AirLive SNMP-FSH2602MG V2, User Manual, Page: 62 / 139

Share
Download
AirLive SNMP-FSH2602MG V2 User Manual Download Page 62

4.  Web Management in SNMP-FSH2602MG v2 

 

 

 

57 

AirLive SNMP-FSH2602MG v2 User’s Manual

 

configuration or you re-configure one of the slave switched as the master by console 
interface. 

 
1. Click 

“

IP Stacking

” in the menu bar. 

2. 

Group ID (0...65535): 

Assign a group ID for stacking group. The switches in the same 

stacking group have same group ID. The valid range is from 1 to 65535.

 

3. 

Stacking Mode: 

Select the stacking mode from drag down list.

 

„

 

Disable:

 It means the switch doesn’t belong to any stacking group or stacking 

function is disabled.

 

„

 

Master: 

It means the switch is the leader (master) in the stacking group. The 

master switch can control all the slave switches in stacking group.

 

„

 

Slave: 

it means the switch is a slave switch of the stacking group. To configure the 

slave switch that you must access by the master switch.

 

4. 

System Information

: Enter system information in box. 

 

 

Summary of Contents for SNMP-FSH2602MG V2












































































































































Reviews:

No comments