manualshive.com logo in svg

AirLive SNMP-FSH2602MG V2, User Manual, Page: 15 / 139

Share
Download
AirLive SNMP-FSH2602MG V2 User Manual Download Page 15

3.  Configuring the SNMP-FSH2602MG v2 

 

 

 

 
AirLive SNMP-FSH2602MG v2 User’s Manual 

10

 
 
 
 
 
 

 
The SNMP-FSH2602MG v2 offers many different types of management interface.  You 
can configure through standard web browser (http), console (terminal), telnet, and SNMP 
management.  In this chapter, we will explain SNMP-FSH2602MG v2’s available 
management interfaces and how to get into them.    Then, we will provide the introduction 
on Web Management and recommended initial settings.    For detail explanations on Web 
Management functions, please go to Chapter 4.  For Console interface, please go to 
Chapter 5. 
 
 

3.1 Important  Information 

The following information will help you to get start quickly.  However, we recommend you 
to read through the entire manual before you start.  Please note the username and 
password are case sensitive.     
 

‰

 

The default IP address is 

192.168.10.1

 

‰

 

The default Subnet Mask is 

255.255.255.0 

‰

 

The default Gateway is 

192.168.10.254

 

‰

 

The default username is 

airlive

 

‰

 

The default password is 

airlive

 

 

 

3.2 Prepare your PC 

The SNMP-FSH2602MG v2 can be managed remotely by a PC through RJ-45 cable.    The 
default IP address of the SNMP-FSH2602MG v2 is 

192.168.10.1

 with a

 subnet mask 

of 

255.255.255.0.  This means the IP address of the PC should be in the range of 
192.168.10.2 to 192.168.10.254.   
To prepare your PC for management with the SNMP-FSH2602MG v2, please do the 
following: 

1. 

Connect your PC directly to the copper port of SNMP-FSH2602MG v2 

 

3 

3. 

Configuring the 

SNMP-FSH2602MG v2

 

 

Summary of Contents for SNMP-FSH2602MG V2












































































































































Reviews:

No comments