manualshive.com logo in svg

AirLive SNMP-FSH2602MG V2, User Manual, Page: 60 / 139

Share
Download
AirLive SNMP-FSH2602MG V2 User Manual Download Page 60

4.  Web Management in SNMP-FSH2602MG v2 

 

 

 

55 

AirLive SNMP-FSH2602MG v2 User’s Manual

 

restore configuration page to restore the EEPROM value. 
1. 

TFTP Server IP Address:

 Fill in the TFTP server IP. The default IP address is 

192.168.10.2. 

2. 

Backup File Name:

 Fill the file name. The default file name is image.bin. 

3. Click 

“

Apply

” button to restore configuration file. 

 

 

 
 

4.7 Factory Default 

 
Reset Switch to default configuration, default value to as following configuration:   

„

 

Default IP address:

 192.168.10.1 

„

 

Default Gateway:

 192.168.10.254 

„

 

Subnet mask:

 255.255.255.0 

„

  The other setting value is back to disable or none. 

Click “

Default

” button to reset switch to default setting. Once resetting to factory default 

successfully, Switch will ask user to reboot the Switch, please click “reboot” button to reboot 
the Switch. 
 

 

 
 

Summary of Contents for SNMP-FSH2602MG V2












































































































































Reviews:

No comments