AirLive RS-3000 Page 163 User Manual Download

Page: 163 / 272

The flow of delivering e-mail:

The three key element of sending e-mail are: MUA, MTA, MDA



MUA (Mail User Agent):

The PC of client cannot send mail directly. It must deliver mail by MUA.

No matter to send or to receive the mail, the Client user still has to use mail system by MUA that

provided by operation system. For example: Outlook Express in Windows is MUA. The main

function of MUA is to receive or send e-mail from mail master and provide the function for users to

browse and edit mail



MTA (Mail Transfer Agent):

When the user sending or receiving mails, they are both completed

by MTA. Basically, its functions are as below:

1. To receive the mail that sent by external master: when receiving the mails from external; only if the

recipient exists in MTA internal account then this mail will be received by MTA.

2. To send mail for user: Only if the user has the authority to use MTA, and then the mail can be sent

by MTA.

3. To let user to receive his/her own mail: The user can take the mails to his/her own PC from mail

master.

Generally the Mail Server we refer to is talking about MTA.



MDA (Mail Delivery Agent):

To let the mail that received by MTA be put in the Mailbox according

to its destination. Or by MTA to send the mail to the next MTA.

161

Summary of Contents for RS-3000

















































































































































































































































































Search results

Summary of Contents for RS-3000

Reviews:

Related manuals for RS-3000

Brands by name

Popular brands

AirLive RS-3000, User Manual

Search results

Summary of Contents for RS-3000

Reviews:

Related manuals for RS-3000

Brands by name

Popular brands