AirLive RS-3000 User Manual Download

Page: 55 / 272

7.1 Pre-defined

Define the required fields of Service

Pre-defined

WebUI’s Chart and Illustration:

Chart Illustration

Any Service

TCP Service, For example

：

AFPoverTCP, AOL, BGP, FTP, FINGER,

HTTP, HTTPS, IMAP, SMTP, POP3, GOPHER, InterLocator, IRC, L2TP,

LDAP, NetMeeting, NNTP, PPTP, Real-Media, RLOGIN, SSH, TCP-ANY,

TELNET, VDO-Live, WAIS, WINFRAME, X-WINDOWS, MSN, …etc.

UDP Service, For example

：

IKE, DNS, NFS, NTP, PC-Anywhere, RIP,

SNMP, SYSLOG, TALK, TFTP, UDP-ANY, UUCP,…etc.

ICMP Service, Foe example

：

PING, TRACEROUTE…etc.

Define the required fields of Service

New Service Name:



The System Manager can name the custom service.

Protocol



The protocol type to be used in connection for device, such as TCP and UDP mode

Client Port:



The port number of network card of clients. (The range is 0 ~ 65535, suggest to use the default

range)

Server Port:



The port number of custom service

Summary of Contents for RS-3000

















































































































































































































































































Search results

Summary of Contents for RS-3000

Reviews:

Related manuals for RS-3000

Brands by name

Popular brands

AirLive RS-3000, User Manual

Search results

Summary of Contents for RS-3000

Reviews:

Related manuals for RS-3000

Brands by name

Popular brands