manualshive.com logo in svg

AirLive RS-3000, User Manual

Share
Download
AirLive RS-3000 User Manual Download Page 107

 

14.4 Trunk 

 

Define the required fields of Tunnel Function 

 

 

To display the VPN connection status via icon

。

 

 

Chart -- 

 

 

Meaning 

Not be applied 

Disconnect Connecting 

 

Name:

 

 

The VPN name to identify the VPN tunnel definition. The name must be the only one and cannot 

be repeated. 

 

Source Subnet:

 

 

Displays the Source Subnet. 

 

Destination Subnet:

 

 

Displays the Destination Subnet. 

 

Tunnel:

 

 

Displays the Virtual Private Network’s (IPSec Autokey, PPTP Server, PPTP Client) settings of 

Tunnel function. 

 

Configure:

 

 

Click

 Modify

 to change the argument of VPN Tunnel; click

 Remove

 to remote the 

setting.(Figure14-4)

 

 

Figure14-4 VPN Tunnel Web UI 

 

105

Summary of Contents for RS-3000

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands