Air-Vac PCBRM15, User Manual

Page: 76 / 120

Pcbrm15 & PCBRM System 5.2 User’s Manual Chapter 5: Maintenance/Parts
Part No. 4005.00.906
5-8
5.4 Pump Leveling
Carrier Arms Parallel Solder Pump:
Tools Needed:
−
1/16” Allen wrench,
−
5/16” Cresent wrench,
−
Bubble level
Steps:
•
Mount the pump onto the solder pot and snug the mounting screws. DO NOT OVER TIGHTEN.
•
Bring to bear the (4) leveling screws leaving the lock nuts loose.
Note:
W
HEN ADJUSTING THE PUMP
,
THE TWO MOUNTING SCREWS NEED TO BE LOOSENED PRIOR TO
MAKING ADJUSTMENTS TO ANY OF THE LEVELING SCREWS
. T
HEN
,
SNUG BACK DOWN TO READ
THE LEVEL
. T
WO LEVELING SCREWS NEED TO BE ADJUSTED IN ANY ONE ADJUSTMENT
.
E
XAMPLE
–
WHEN PARAL
L
ELING THE PUMP TO THE CARRIER ARMS
,
EITHER THE RIGHT TWO
SCREWS WILL BE ADJUSTED TOGETHER
,
OR THE LEFT TWO SCREWS TOGETHER FOR
E
AST
/W
EST ADJUSTMENT
. A
ND THE
BOTTOM TWO SCREWS
WILL BE ADJUSTED
TOGETHER
OR
THE
TOP TWO SCREWS
FOR
N
ORTH
/S
OUTH ADJUSTMENT
I
T IS ALSO
VERY CRITICAL TO ADJUST BOTH SCREWS EXACTLY THE SAME AMOUNT
.
Right two leveling
screws and lock nuts
Top two leveling screws and
lock nuts