Air-Vac PCBRM15, User Manual

Page: 17 / 120

PCBRM15 & PCBRM System 5.2 User’s Manual Chapter 2: Requirements/Machine Overview
Part No. 4005.00.906
2-3
2 Requirements/Machine Overview
2.1 Facility Requirements - PCBRM15
•
Physical Dimensions: 32”W x 26”D x 26”H
•
Maximum Board Size: 22”W x 21”D
•
Weight: 125 lbs. (with solder), 90 lbs. (without solder)
•
Electrical Requirements:
- Machine (PCBRM15): 208/220VAC, 13 Amps, 50/60 Hz, Single Phase.
Plug = 15 Amp, 250VAC, Nema 6-15P.
- Heater Box (optional): 110/120VAC, 4 Amps, 50/60 Hz, Single Phase.
(PCBRM15)
- Machine (PCBRM15.Z): 208/220VAC, 13 Amps, 50/60Hz, Single Phase.
Plug = Continental Europe 16 Amp
- Heater Box (optional): 208/220VAC, 2 Amps, 50/60Hz, Single Phase
(PCBRM15.Z)
•
Compressed Air (optional): 40-80 psi, 2 scfm, clean, moisture-free air (intermittent),
1/8 NPT(M) fitting required.
2.2 Facility Requirements - PCBRM System 5.2
•
Max Operating Dimensions: 76”W x 38”D x 28”H
•
Weight: 230 lbs. (with solder), 195 lbs. (without solder)
•
Electrical Requirements:
- Machine (System 5.2) 208/220 Vac, 45 Amps-full load (overload protected to 55 Amps),
50/60 Hz, single phase, 6 awg 3 wire cord supplied.
- Heater Box (optional): 120 Vac, 4 amps, 50/60 Hz, single phase.
(System 5.2)
- Machine (System 5.2.Z) 208/220 Vac, 15 Amps-full load (overload protected to 20 Amps),
50/60 Hz, 3 phase, 2.5mm
2
x 5 wire cord provided.
- Heater Box (standard): 220 Vac, integral with machine power
(System 5.2.Z)
•
Compressed Air (optional): 40-80 psi, 2 scfm, clean, moisture-free air (intermittent),
1/8 NPT(M) fitting required.
Miscellaneous
•
35 lbs. of solder
•
Level work area.
•
Venting is recommended.