Air-Vac PCBRM15, User Manual

Page: 18 / 120

PCBRM15 & PCBRM System 5.2 User’s Manual Chapter 2: Requirements/Machine Overview
Part No. 4005.00.906
2-4
(I) - option
(J)
(C)
(D)
(A)
(H) - option
(B)
(F)
(G)
(B)
2.3 PCBRM15 - Module Overview
(A) X-Axis Carrier Rail - Cantilever carrier rail adjusts to hold PCB up to 22”W.
(B) PCB Carrier Arms - Carrier arms hold PCB up to 21” deep. PCB Stops with reference scale
provides one time set-up of repetitive assemblies.
(C) X-Axis Carrier Lock - Once PCB is aligned over flow well, the carrier is locked in place.
(D) Z- Axis Height Adjustment - Adjusts height of PCB in relation to the flow well.
(F) Solder Pot
(G) Solder Pump
(H) APS System-
Blows low pressure air through holes in PCB of removed component to clear them of
solder.
(I) APS System Air Regulator – Sets air pressure.
(J) Emergency Stop – Shuts system down immediately if required.