Page 49
Air Techniques, Inc.
Troubleshooting
Problem
Probable cause
Solution
X-ray image split vertically
into two halves
Dirt in the laser slit (e.g. hair, dust • Clean the laser slit.
X-ray image with small bright
spots or clouding
Micro scratches on the PSP
• Replace the PSP.
Lamination of the PSP
detaches at the edge
Wrong retainer system used
•
Only use original PSP and film retainer systems.
PSP handled incorrectly
• Use the PSP correctly.
• Comply with the operating instructions of the
PSP and film retainer systems.
15.2 Software error.
Problem
Probable cause
Solution
Too much ambient light
Unit is exposed to too much light • Darken the room.
• Turn the unit such that no light can directly enter
into the entry slot.
Overtemperature
Laser or erasure unit too hot
•
Switch the unit off and allow it to cool.
Erasure unit fault
LED defective
• Contact technician.
Summary of Contents for J1100
Page 2: ......
Page 62: ...Air Techniques Inc Page 62 NOTES...
