Air Techniques, Inc.
Page 10
IMPORTANT INFORMATION
Air Techniques cannot be held responsible for any damage
to the unit resulting from transport in unsuitable packaging;
this is also valid during the period of guarantee.
2.7 Transport
Only the original packing ensures optimum protection for the appliance during transport. Where
required original unit packing for this unit can be ordered from Air Techniques.
Only transport the unit in its original packing.
Keep all packaging away from children.
D
o not expose the unit to any strong vibrations or shocks
2.8 Disposal
Unit
Dispose of the unit correctly. The unit must be disposed of only at the appropriate facilities for recovery and
recycling in accordance with the locally applicable regulations.
PSP
The PSP contains barium compounds.
Dispose of the image plate properly in accordance with the locally applicable regulations.
2.9 Using Plates and Barrier Envelopes
Only use ScanX with Air Techniques plates and barrier envelopes.
Plates and barrier envelopes from other manufacturers can lead to loss of image data or
poor quality images, interference with correct operation and greater wear of the ScanX.
2.10 Using software
Only use imaging software that has been authorized by Air Techniques. Further information
can be found on our web site
www.airtechniques.com.
See Section 7 for the supported operating systems and computer requirements.
2.11 Protection from cybersecurity threats
The unit is to be connected to a computer that can be connected to the Internet. Therefore, the system
needs to be protected from threats from the Internet.
Use antivirus software and update it regularly. Look for evidence of possible virus infection
and, if applicable, check with the antivirus software and remove the virus.
Perform regular data backups.
Provide access to units only to trustworthy users, e.g. by means of user name and password.
Make sure that only trustworthy contents are downloaded. Install manufacturer-authenticated
software and firmware updates only.
2.12 FCC Compliance Statement
CAUTION: Changes or modifications not expressly approved could void authority to use this equipment
This device complies with Part 15 of the FCC Rules. Operation to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
2.13 Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Summary of Contents for J1100
Page 2: ......
Page 62: ...Air Techniques Inc Page 62 NOTES...
