Air Techniques, Inc.
Page 6
• ScanX contains a laser and is a Class 1 [Class
1 (IEC 60825)] Laser Product. Use of controls
or adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure. The laser is on
only during an active scan.
• Alerts user that Scanx becomes a Class 3B
device when opened. Only a trained tech-
nician from an authorized dealer should
remove a cover from the ScanX. Direct eye
contact with the output beam from the laser
may cause serious damage and possible
blindness.
ELECTRIC
SHOCK
RISK
• The power line cord is the main power discon-
nect device.
• Use only the line cord provided with the unit.
• To avoid risk of electric shock, fire, short-circuit
or dangerous emissions, never insert any metallic
object into the equipment.
• Only use connection cable(s) delivered with the
device.
ELECTRIC
SHOCK
RISK
• Check the device cables for possible damage
before switching on. Damaged cables, plugs and
sockets must be replaced before use.
• Never touch open supply outlets.
• Do not locate unit where it could be sprayed
with water, or in a damp environment.
Caution
• While the ScanX has been designed to minimize
exposure of personnel to hazards, using the device
not in conformance with the instructions specified
in this manual may result in permanent failure of
the unit or unsafe operation.
Caution
• Only trained professionals should use this
device. Use of this device, other than as
described in this manual, may result in injury.
Caution
• Before every use, the operator must check the
functional safety and the condition of the device.
The operator must be knowledgeable in the
operation of the device.
Caution
• Operate ScanX in dry environment. To prevent
injury from fire or electrical shock, do not
expose this appliance to rain or moisture.
Warning
• Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure
Caution
• The use of accessory equipment not complying
with the equivalent safety requirements of this
equipment may lead to a reduced level of safety
of the resulting system.
Warning
• Use of accessories, transducers and cables
other than those specified or provided by the
manufacturer of this equipment could result
in increased electromagnetic emissions or
decreased electromagnetic immunity of this
equipment and result in improper operation.
Warning
• Portable RF communications equipment (including
peripherals such as antenna cables and external
antennas) should be used no closer than 30
cm (12 in) to any part of the ScanX including
cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment
could result.
The signal word differentiates between four levels of danger:
DANGER:
Indicates immediate danger of severe injury or death.
WARNING:
Indicates possible danger of severe injury or death.
CAUTION:
Indicates risk of minor injuries.
NOTICE:
Indicates information is considered important, but not hazard-related (e.g. messages
relating to risk of extensive material/property damage). The safety alert symbol shall not be used with
this signal word. When a signal word is used for messages relating to property damage, NOTICE is the
choice of signal word.
Knowledge of Warnings and Cautions.
Users must exercise every precaution to ensure personnel safety, and be familiar with the warnings and cautions
presented throughout this manual and summarized below.
IMPORTANT INFORMATION
Summary of Contents for J1100
Page 2: ......
Page 62: ...Air Techniques Inc Page 62 NOTES...
