Page 41
Air Techniques, Inc.
Operation
12.7 Scanning image data via a computer
Starting the imaging plate scanner and software:
The scanning process using the DBSWIN or other third party imaging
software is described For further information on using the imaging
software, refer to the relevant manual.
Scan the imaging plate using a computer and imaging software by performing the following steps.
1. Press the on/off switch to switch on the unit.
2. Switch on the computer and monitor.
3. Start the imaging software (DBSWIN).
4. Select the patient.
5. Select the exposure values in the X-ray module.
6. Set the required resolution.
7. Click the Scan button.
8. If ScanManager is enabled, select the X-ray job on the touch screen of the unit.
Result:
As shown below, an animation on the touch screen prompts for insertion of the imaging plate.
Insert the imaging plate only when the bar above the animation is green.
12.6 Image data scanning.
ScanX can be used to scan in two different ways:
Via user supplied imaging software (e.g. DBSWIN) and a PC
Directly by using the touch screen and a Memory card (SDHC, max. 32 GB).
Each option is described below.
Example animation prompting for
imaging plate insertion
Green Bar
Summary of Contents for J1100
Page 2: ......
Page 62: ...Air Techniques Inc Page 62 NOTES...
