4.
Web Management
AirLive AirMax4GW User’s Manual
91
3.
Clear:
Delete all existed QoS rules.
4.
Restart:
Press “Restart” button to re-initiate all QoS rules again.
5.
Edit:
Configure the specific QoS rule again.
4.2.2.2.3 QoS Rule Configuration
It supports the adding of one new rule or the editing of one existed rule. There are
some parameters need to be specified in one QoS rule. They are Interface, Group,
Service, Resource, Control Function, QoS Direction, Sharing Method, Time Schedule
and finally, the rule enable.
1.
Interface:
Select the WAN interface for the QoS rule.
2.
Group:
Specify the target client members for the rule by their VLAN ID,
MAC Address, IP Address, Host Name or Group Object. These base
categories depend on product models. Besides, “IP Address” group can be
defined as an IP range with an IP address and its subnet mask. And “Group
Object” is defined in the
System
->
Grouping
menu. But what kinds of
groups to use depend on product models.
3.
Service:
There are 5 options for service, including All, DSCP, TOS,
User-defined Services and Well-known Service as below.
By default, it is “All”. It defines “what” kinds of service packets need to be managed.
When “DSCP” is selected, another “DiffServ CodePoint” value must be specified.
DSCP means DiffServ Code Point, as known as advanced TOS. You can choose this
option if your local service gateway supports DSCP tags. The DSCP categories that
this gateway can detect are as below.