4.
Web Management
AirLive AirMax4GW User’s Manual
148
4.4.4.1 External Server List
External Server List can show the list of all defined external server objects and their
attributes in this window. You can add one new external server object by clicking on
the “Add” command button. But also you can modify some existed external server
objects by clicking corresponding “Edit” command buttons at the end of each object
record in the External Server List. Besides, unnecessary objects can be removed by
checking the “Select” box for those objects and then clicking on the “Delete”
command button at the External Server List caption.
1. Add
: Click on the button to add one external server object.
2. Delete:
Click on the button to delete the external server objects that are specified in
advance by checking on the “Select” box of those objects.
3. Edit
: Click on the button to edit the external server object.
4. Select:
Select the external server object to delete.
4.4.4.2 External Server Configuration
1. Server Name
: Define the name of external server object.
2. Server IP/FQDN:
Specify the IP address or domain name of external server.
3. Server Port:
Specify the service port of external server.
4. Server Type:
Select one server type from the option list of “Email Server”, “Syslog
Server”, “RADIUS Server”, “Active Directory Server”, “LDAP Server” and “UAM
Server”. Based on your selection, there are several parameters need to specify.
When you select “Email Server” option for the Server Type, you must specify two
more parameters, “User Name” and “Password”. When “Syslog Server”, no more
parameter is required. When “RADIUS Server”, you can specify primary RADIUS
server and secondary RADIUS server for redundancy. For each server, following
parameters need to be specified: Shared Key, Authentication Protocol (CHAP or
PAP), Session Timeout (1~60 Mins) and Idle Timeout (1~15 Mins). When “Active
Directory” Server, you must specify one more parameter, “Domain”. When “LDAP”
Server, one more parameter, Base Domain Name. When “NT Domains” Server, one
more parameter: “Workgroup”. When “UAM” Server, following parameters must be
provided: “Login URL”, “Shared Secret”, “NAS/Gateway ID”, “Location ID” and
“Location Name”. Among them, Location Name is optional.
5. Server:
Check the “Enable” box to activate the external server object.