4.
Web Management
AirLive AirMax4GW User’s Manual
118
1.
SNMP Enable
: You can check “Local (LAN)”, “Remote (WAN)” or both to
enable SNMP function. If “Local (LAN)” is checked, this device will respond to
the request from LAN. If “Remote (WAN)” is checked, this device will respond
to be request from WAN.
2.
WAN Access IP Address:
If you want to limit the remote SNMP access to
specific computer, please enter the PC`s IP address. The default value is
0.0.0.0, and it means that any internet connected computer can get some
information of the device with SNMP protocol.
3.
SNMP Version:
Supports SNMP V1 and V2c.
4.
Get Community:
The community of GetRequest that this device will
respond. This is a text password mechanism that is used to weakly
authenticate queries to agents of managed network devices.
5.
Set Community:
The community of SetRequest that this device will accept.
6.
Trap Event Receiver 1 ~ 4:
Enter the IP addresses or Domain Name of
your SNMP Management PCs. You have to specify it, so that the device can
send SNMP Trap message to the management PCs consequently.
7.
WAN Access IP Address:
The IP address of remote control site to manage
the device by using SNMP protocol.
A User Privacy table is used for only SNMP v3. It defines the user list and their
privacy and authority settings.