manualshive.com logo in svg

Air Live AirMax4GW, User Manual, Page: 9 / 171

Share
Download
Air Live AirMax4GW User Manual Download Page 9

2. Installing the AirMax4GW 

 

        

AirLive AirMax4GW  User’s Manual 

5 

2 

2. 

Installing the 

AirMax4GW 

This section describes the hardware features and the hardware installation 
procedure for the AirMax4GW. For software configuration, please go to chapter 3 for 
more details. 

2.1 Before You Start 

It is important to read through this section before you install the AirMax4GW 

 

 

The AirMax4GW comes with everything you need to start installation with 
exception of the PoE Ethernet Cable  and PoE Injector. You can use a 
good quality CAT-5E outdoor graded Ethernet cable (shielded with anti-UV) 
according to the length you need. 

 

The  AirMax4GW  must be installed in the upright position if the unit is 
located in outdoor or wet environments. 

 

 

The use of 3G/4G LTE, each country have its own telecom regulation for 
the frequency. Please consult with your country’s telecom company for the 
correct SIM card and suitable mobile internet package. 

 

The use of 2.4GHz spectrum, the allowed WiFi  channels can be very in 
different country.  Please consult with your  country’s telecom regulation 
first. 

Summary of Contents for AirMax4GW












































































































































































Reviews:

No comments