4.
Web Management
AirLive AirMax4GW User’s Manual
40
Ethernet port and up to eight WiFi virtual APs. The Ethernet port can serve as NAT or
Bridge type of service interface. However, WiFi VAPs can serve as NAT type only.
Since only one Ethernet port, there is little configuration to be required in the device
for Port-based VLAN settings.
By default, the Ethernet LAN port (Port-1) and 8 virtual APs belong to one VLAN, and
this VLAN is a NAT type network, all the local device IP addresses are allocated by
DHCP server 1. If you want to change Port-1 to be Bridge type of service interface,
click on the “Edit” button.
1. Type
: Select “NAT” or “Bridge” to identify if the packets are directly bridged to the
WAN port or processed by NAT mechanism.
2. LAN VID
: Specify a VLAN identifier for this port. The ports with the same VID are in
the same VLAN group.
3. Tx TAG
: If you want to let Intranet packets to be inserted with a
“VLAN Tag”
for the
VLAN group, please check the “Tx TAG” box.
4. DHCP Server
: Specify a DHCP server for the configuring VLAN group at "NAT" type.
But the device provides only one DHCP server to serve the DHCP requests from the
VLAN group. Leave it be "DHCP-1".
5. WAN VID
: The VLAN Tag ID that come from the ISP service. For NAT type VLAN, no
WAN VLAN tag is allowed and the value is forced to “0”; For Bridge type VLAN, You
have to specify the VLAN Tag value that is provided by your ISP.
6. VLAN Routing Group
: