4.
Web Management
AirLive AirMax4GW User’s Manual
90
•
Individual / Group Control
➢
One QoS rule can be applied to individual member or whole group
in the target group. This feature depends on model.
•
Outbound / Inbound Control
➢
One QoS rule can be applied to the outbound or inbound direction
of packet flow, even them both. This feature depends on model.
4.2.2.2.1 Configuration
It supports the activation of Rule-based QoS.
1.
Rule-based QoS Enable
: Check the box if you want to enable the QoS &
BWM function.
2. Flexible Bandwidth Management:
Apply flexible bandwidth management on
the specific WAN interface by checking the Enable box.
4.2.2.2.2 QoS Rule List
It is a list of all QoS rules. You can add one new rule by clicking on the “Add”
command button. But also you can modify some existed QoS rules by clicking
corresponding “Edit” command buttons at the end of each rule in the QoS Rule List.
Besides, unnecessary rules can be removed by checking the “Select” box for those
rules and then clicking on the “Delete” command button at the QoS Rule List caption.
One “Clear” command button can let you clear all rules and “Restart” command
button can let you restart the operation of all QoS rules.
1.
Add:
After you enabled the rule-based QoS function, you can click on the
“Add” button to create a new QoS rule.
2.
Delete:
After you selected some QoS rules by checking the “Select” box for
each rule, you can click on the “Delete” button to remove those rules from the
list.