SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
19
www.smartycam.com
3 0
6.4.2 –Automatic recording
It is possible to set the automatic recording option (“
AUTO REC
”), to start/stop recording
without manual input:
•
In slave mode
(
SmartyCam
connected to an AIM logger or ECU Bridge): the
logger transmits a start/stop recording input to
SmartyCam
, as soon as it detects
RPM or a speed higher/lower than 10 km/h.
•
In stand alone mode
: recording starts automatically when speed is higher than 10
km/h or acceleration exceeds a threshold value (accelerometer threshold value) to
be selected among low (0.2 G), med (0.4 G) and high (0.8 G).
Auto pause
: defines a time period (20 sec., 1, 2 or 5 minutes)
SmartyCam
will go on
recording even without acceleration or speed. After this period recording process will
pause. This function is useful i.e. to go on recording during a pit stop.
1 9
6.5 – SmartyCam recording support
SmartyCam
kits include a 4 Giga Micro SD but it can support up to 16 Giga.
Warning: use only High Capacity Micro SD like this:
Warning: do not remove the Micro SD when SmartyCam is recording or is in
“Player” mode (Micro SD icon is red). Otherwise the Micro SD will be permanently
damaged.
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...