![background image](http://html1.mh-extra.com/html/aim/smartycam/smartycam_user-manual_2871725011.webp)
SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
11
www.smartycam.com
2 4
3.2 – Connecting SmartyCam in Slave expansion mode with ECU Bridge
In order to receive the info provided by the vehicle ECU without any additional logger,
SmartyCam
must be used in Slave expansion mode and connected via CAN to an ECU
Bridge, using the 7-pins connector placed on the product rear.
There are two available ECU Bridges version:
•
code X90BGGPI2R for connection with aftermarket racing ECU with CAN or RS232
communication protocol.
•
code X90BGGPI2K for connection with stock ECU through the OBDII, no matter if
having a CAN communication protocol or the K line
Complete documentation on supported ECU is available at
www.aim-sportline.com
“Download” area, ECU connection section. Refer to appendix “B” of this user manual to
know
SmartyCam
pinout, while
SmartyCam ECU Bridge
connection is shown at
www.smartycam.com
, “Connection” area, ECU Bridge section.
PLEASE NOTE: refer to Race Studio Configuration user manual for more info about
ECU Bridge configuration, and to www.aim-sportline.com documentation download
area for more info about ECU supported by AIM systems and their
communication/connection protocols.
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...