SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
6
www.smartycam.com
1 1
2 – SmartyCam Slave (connected to AIM logger/the ECU via ECU
Bridge)
Install SmartyManager and Race Studio 2 software on the PC.
The first one is needed
to download new firmware versions from download area of
www.smartycam.com
and
update
SmartyCam
functionalities, modify/add/delete overlay configurations – if desired –
and download/see
SmartyCam
movies (Chapter 5). The CD included in
SmartyCam
kit
contains
SmartyManager
and
Race Studio 2
that can also be downloaded from
www.aim-sportline.com
, download area >>software section.
Periodically check possible
ction of
www.aim-sportline.com
new software/firmware releases.
Configure the logger (or ECU Bridge) with Race Studio 2
See
Race Studio Configuration
user manual, downloadable from download
area>>software se
to know how to configure each logger
r manual downloadable from
www.aim-sportline.com
and ECU Bridge.
Configure SmartyCam with SmartyManager
See SmartyManager use
download
n modes are showed in “Connection” area of
www.smartycam.com
area>>software section.
Connect SmartyCam to the logger
Each logger connectio
.
ct (carefully close after insertion).
h suction cup, etc.). They
Insert the micro SD
The housing is under the rear flip of the produ
Install SmartyCam in the desired position
Install
SmartyCam
in the right position to shoot: the display shows a frame preview.
Optional kits are available for any kind of installation (roll-bar, wit
are shown on
www.smartycam.com
, Accessories>>Bracket kits.
Power on SmartyCam (and enable “AUTO REC” function if desired)
Paragraph 6.4.2).
vention on the camera while travelling.
cy of acceleration
l as the taken images centring (Paragraph 6.3.1.1).
Power on is made through the central button (Paragraph 6.2)
SmartyCam
comes with “AUTO REC” function
disabled
: recording is started/stopped
manually pressing “Rec” and – at the end of the recording session – “Stop” (Paragraph
6.4.1). Enabling “AUTO REC” recording is automatically started/stopped when speed
overcomes 10 km/h or acceleration overcomes a fixed threshold value (
This way there is no need of inter
Calibrating the accelerometer
Accelerometer calibration is important because it influences the accura
measurement as wel
Recording movies
Shooting can be managed both manually and automatically (Paragraph 6.4).
SmartyCam
movies are in
.avi format with H.264 codec
. It is suggested
to use
VLC
player
(downloadable from
http://www.videolan.org/vlc/
). To edit movies use AVS Video Editor
vsmedia.com/it/avs-video-editor.aspx
(downloadable from
http://www.a
).
rting it in the PC reader (Chapter 7). It is
reminded to
use only a 2.0 type USB port
.
Downloading movies on a PC
SmartyCam
allows to download data both via USB and manually extracting the micro SD
from the rear flip of
SmartyCam
and inse
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...