SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
15
www.smartycam.com
6
Chapter 6 – How to use SmartyCam
SmartyCam
is managed using the three buttons placed above the display: 1,2 and 3 in
the image below.
The menu on the display shows the functions related to each button, close to the button
itself.
All
SmartyCam
pages are made up of three parts:
•
top
of page menu functions are shown;
•
in the
middle
of the page specific info is displayed;
•
in the
lower part
the “Battery and Memory Status” field is shown.
1 6
6.1 – “Battery and Memory Status” field
“
Battery and memory Status
” field constantly shows the level of battery charge and the
remaining memory available for recording. “Online”, “GPS status” and “Lap Management”
show the GPS signal strength.
The above indicator
refers to the available memory, showing in black the used part and
in grey the available memory. When available memory is lower than 300 kb the black part
becomes red. The number right of the bar is the available space in Giga (in the image
below
SmartyCam
is working with a 4 Giga Micro SD). Please note that Micro SD icon
becomes red when
SmartyCam
is recording, or when it is in “Player” mode.
WARNING: MicroSD will be permanently damaged if it is removed from SmartyCam
when its icon in the left bottom of the screen is red.
The below indicator
shows the battery charge status while the number on the right shows
the percentage of available battery (image here below)
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...