![background image](http://html1.mh-extra.com/html/aim/smartycam/smartycam_user-manual_2871725012.webp)
SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
12
www.smartycam.com
2 5
3.3 – SmartyCam in Slave expansion mode with AIM loggers
SmartyCam
can visualize data sampled by an AIM logger (
EVO3 Pro
/
Pista
,
EVO4
,
MXL
Strada
/
Pista
/
Pro05
or
MyChron4
) and by the vehicle ECU. In this case it is necessary to
connect
SmartyCam
via CAN to the logger, using the CAN cable inserted into the 7-pins
connector placed right of the product rear.
Please refer to appendix “B” of this manual for the SmartyCam pinout and to the
user manual of each AIM logger to know its pinout.
The image below shows
SmartyCam
connected to an
EVO4
logger while
SmartyCam
-
EVO4
connection is explained at
www.smartycam.com
, “Connections” area,
EVO4
section..
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...