![background image](http://html1.mh-extra.com/html/aim/smartycam/smartycam_user-manual_2871725010.webp)
SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
10
www.smartycam.com
3
Chapter 3 – SmartyCam connections
The alternative
SmartyCam
modes (Stand Alone or Slave Expansion) require different
connection procedures.
1 3
3.1 – Connecting SmartyCam stand alone
SmartyCam
stand alone can be connected in different ways:
•
connection to the external power only: use the 7-pins left connector highlighted in
the image above and connect the power cables to a 12 Volts power source i.e. the
vehicle battery. See appendix “B”.
•
connection to the external microphone only: the external microphone plugs directly
in the 7 pins connector highlighted in the image here above.
•
connection to optional cables and external microphone: use the 7-pins connector
highlighted in the image here above and connect the power cables to an external 12
Volts power source.
•
connection to the external GPS module: use the 4 pins female connector placed
right of the product rear (see above).
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...