![background image](http://html1.mh-extra.com/html/aim/smartycam/smartycam_user-manual_2871725004.webp)
SmartyCam
User Manual
Release 1.11 – firmware version 1.00.44
4
www.smartycam.com
INTRODUCTION
SmartyCam
features three different working modes.
Stand alone
: for non-motorsport applications or for motorsport applications whenever
there is no ECU nor AIM data acquisition system/data logger (from here onward: logger).
Slave connected to the vehicle ECU
: for motorsport applications to sample data from the
ECU with no need of additional sensors. In this case an AIM ECU Bridge is required. It is
described in
www.smartycam.com
, “Accessories” area.
Slave connected to an AIM logger
: for motorsport applications when a detailed analysis
of performances is needed, desired. In this case the ECU bridge is not required because
connection to the vehicle ECU is made using an AIM logger.
SmartyCam
is supported by
the following loggers:
•
MXL,
•
EVO3,
•
EVO4,
•
MyChron4.
Information concerning these loggers are on “Car” and “Kart” –
MyChron4
only – section
of
www.aim-sportline.com
.
Summary of Contents for Smartycam
Page 1: ...SMARTYCAM User Manual...