© 2013 Agrowtek Inc.
www.agrowtek.com
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | [email protected]
26
Cycle Timers
Cycle timers operate in a continuously repeating on-off-on… loop. Cycle timers can be operated during the day & night, day
only, or night only.
On/Off Time: Specify the on and off durations for the cycles.
Timer Units: Select units of minutes or seconds.
When to Operate Timer: Choose when this timer should
operate; day only, night only or both.
Zone: Zone to detect day and night from.
Output: Output to operate with the cycle timer.
Example uses include:
Timing water pumps for hydroponics systems.
Intermittent operation of circulation fans or ventilation fans
Other timed, cycled equipment.
Touch Panel
The cycle timer menu is accessed from the timers menu.
Software
The cycle timer settings are accessed via the controls tab under the “Cycle Timers” group.
Output On
Off
‘On’ Time ‘Off’ Time
Day/Night
Start
Day/Night
per zone#
Timer Control
If Day/Night status = Mode
(and On/Off times are not 0)
Turn ON Output
for ON time duration
On & Off Time
Mins / Secs
Output #
Time Units
Mins/Secs
Mode
Day/Night/Both
Zone #
0 defaults to 1
Turn OFF Output
for Off time duration
Press “Cycle Timers” button to access
the cycle timers menu.
Select a timer to view its settings.
Press the buttons to change the values
with a numeric key pad.
