© 2013 Agrowtek Inc.
www.agrowtek.com
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | [email protected]
22
Touch Panel
The CO
2
controls are accessed from the “Controls” menu by touching the “CO2” button. Select between injection and
ventilation controls.
Software
The CO
2
ventilation controls are accessed from the “CO2” controls group on the “Controls” tab.
Control set points and on/off
output selection.
VSC % output settings.
Only settings applicable to injection
are shown.
Over-ride standard CO2 set-point
during the time interval.
Press “CO2” button to access the CO
2
controls.
Select ventilation settings.
Enter maximum ppm values, dead-
band, on/off output and/or VSC # and
minimum % open settings for VSC.
