© 2013 Agrowtek Inc.
www.agrowtek.com
| 83 Ambrogio Dr Suite H Gurnee, IL 60031 | [email protected]
8
Run / Stop
The controller will automatically turn the equipment outputs on and off depending on how they are programmed to operate
when the system is in “Run” mode. All of the outputs can be stopped simultaneously by placing the controller into “Stop”
mode. Placing the controller back into “Run” mode by pressing Start will allow the outputs to operate as the controller
requires.
Touch Panel
From the Home screen press the Status button to access the run mode menu. When the controller is stopped, “System OFF”
will be displayed in red. When the controller is running, “System ON” will be flashing in green.
Software
The controller can be started or stopped from the PC software by pressing the “Run/Stop” button in the lower left corner when
connected to the controller.
1.The home screen; press “Stopped”
button to enter run mode screen.
2. Press “Run” to place the system into
‘run’ mode or “Stop” to stop the
controller. Press “Back” to return to the
previous screen.
Day/Night/Off
mode display
NOTE
Before any outputs will activate, the system must be placed into “Run” mode.
When the system is in “Run” mode, the outputs can be turned on. When in “Stop” mode, all outputs will be disabled.
3. The home screen will show green for
run and the current zone’s day or night
mode.
