manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 91 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 91

User manual - Maximulch - Series 3 | Series 5 | Series 6

Winter Storage - Handling - Transport

91

NOTT-GB-708-A

06/12/2019

7.3.  Transport

CAUTION

Firmly  secure  the  machine  on  the  flat-bed  using  straps  that  are  compliant  and  have  been 

checked in accordance with the applicable regulations.

Ensure that there are no unsecured items on the flat-bed which might be thrown against the 

machine during transport.

The machines are equipped with attachment points 

for lifting operations. Pictograms enable them to be 

more quickly identified.

Handling must be carried out using appropriate 

lifting and wedging equipment and accessories for 

the load to be moved, that are compliant and have 

been checked in accordance with the applicable 

regulations.

To know the approximate weight of the assembly, see 

Characteristics.

NOTT-0412

Fig. 89

 

During transport, the machine must be secured as described below.

Summary of Contents for 5 Series



































































































































Reviews:

No comments