manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 74 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 74

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

74

NOTT-GB-708-A

06/12/2019

NOTE

The MAXIMULCH can be used without the blades by simply removing the blades. To remove 

the blades, follow the procedure described above, lowering the blades as far as possible so 

that they come out of their rack and pinion housings.

CAUTION

At the end of the field, the MAXIMULCH must be lifted to avoid subjecting the tool to crossways 

movements before turning around.
The tractor should therefore be aligned with the direction of work before the MAXIMULCH is 

lowered.

Hydraulic adjustment of blade depth

1 -  Release the pressure on the pins by raising the 

blades slightly using the tractor's control valve.

2 -  Remove the adjustment pins. 

NOTT-0423

Fig. 64

 

3 -  Using the double-acting control valve, adjust the 

blades to the required height.

4 - 

Refit the pins, rings and clips.

NOTT-0424

Fig. 65

 

Summary of Contents for 5 Series



































































































































Reviews:

No comments