manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 69 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 69

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

69

NOTT-GB-708-A

06/12/2019

CAUTION

It is forbidden to drive the Maximulch unless the brake couplings are connected to the tractor.

6.6.1. Coupling

1 -  Reverse up to the machine and hitch the machine to the tractor.
2 - 

Connect the hoses: first the yellow line then the red line.

3 -  The brake hoses are now attached and ready to operate.

6.6.2. Uncoupling

1 -  Bring the machine to the parking position.
2 -  Chock the wheels.
3 -  With the machine still connected to the tractor, disconnect the red brake line then the yellow line.
4 -  The brake is automatically actuated and the machine will not move.

NOTE

If the machine's tank is drained of air once all lines have been detached the brakes will come 

off (same situation as pushing the shunt valve).

5 -  Put the hoses back in place.

6.7.  Single-line hydraulic brake system

For machines equipped with a single-line hydraulic 

braking system, connect the brake hydraulic take-off 

to the tractor to ensure safe braking of the towed unit.

NOTT-0343

Fig. 58

 

Summary of Contents for 5 Series



































































































































Reviews:

No comments