Agrisem 5 Series User Manual Download Page 60

Page: 60 / 130

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

NOTT-GB-708-A

06/12/2019

4 -

Put the parking stands in place (if the machine is fitted with them).

5 - Lower the machine with the drawbar and the trailed or semi-mounted kit.
6 -

Disconnect the hydraulic hoses if the machine is fitted with them. If you are using a towing hook, disconnect

any hydraulic hoses last in order to be able to adjust the height of the drawbar.

7 -

Operate the mechanical handbrake system, if fitted.

8 - Disconnect the plug for the lighting equipment.
9 - Unhitch the machine.

6.4. Folding / unfolding

6.4.1. Folding / unfolding the roller

WARNING

Before carrying out hitching and unhitching operations, you MUST refer to the safety

instructions.

WARNING

Before folding or unfolding check that there are no foreign bodies that could hinder movement.

WARNING

No-one must be within 50 metres of the machine while it is being folded or unfolded.

6.4.2. Folding the hydraulic roller

Operations must be performed in the order indicated below to avoid damaging certain components of the

Maximulch.

1 - Initial position: roller unfolded

NOTT-0267

Fig. 36

Summary of Contents for 5 Series



































































































































Search results

Summary of Contents for 5 Series

Reviews:

Agrisem 5 Series, User Manual, Page: 60 / 130

Search results

Summary of Contents for 5 Series

Reviews: