manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 86 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 86

User manual - Maximulch - Series 3 | Series 5 | Series 6

Winter Storage - Handling - Transport

86

NOTT-GB-708-A

06/12/2019

7.2.  Handling

CAUTION

Never stand in the handling area as this could result in serious or fatal injury.

CAUTION

The lifting points must be used simultaneously for the safety of handling.

CAUTION

During handling, some components may have sharp edges. Wear suitable personal protective 

equipment (safety gloves, goggles, safety shoes) when handling the components.

The machines are equipped with attachment points 

for lifting operations. Pictograms enable them to be 

more quickly identified.

Handling must be carried out using appropriate 

lifting and wedging equipment and accessories for 

the load to be moved, that are compliant and have 

been checked in accordance with the applicable 

regulations.

To know the approximate weight of the assembly, see 

Characteristics.

NOTT-0381

Fig. 84

 

Summary of Contents for 5 Series



































































































































Reviews:

No comments