manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 116 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 116

User manual - Maximulch - Series 3 | Series 5 | Series 6

Servicing - Maintenance

116

NOTT-GB-708-A

06/12/2019

8.4.15. Braking system adjustment

1 -  Lift the axle, the tyre must no longer be in contact 

with the ground

2 -  Release the parking brake system.
3 -  Turn the adjusting nut (1) clockwise to bring the 

brakes into contact and until the wheel no longer 

rotates.

4 -  Turn the adjusting nut (1) anti-clockwise, stop 

when the wheel rotates freely.

5 -  Check the brake by applying the handbrake 

a few notches, and check that the wheels no 

longer turn.

6 -  Release the handbrake.
7 -  Check that the braking cylinder stroke is identical 

when the axle is in the working position and in 

the transport position.
If the cylinder stroke is identical, adjustment is 

completed.
If the stroke varies, restart the adjustment from 

step 3.

 

NOTT-0360

1

Fig. 109

 

Summary of Contents for 5 Series



































































































































Reviews:

No comments