manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 40 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 40

User manual - Maximulch - Series 3 | Series 5 | Series 6

Safety instructions

40

NOTT-GB-708-A

06/12/2019

5.2.  Safety symbols on the machine

DANGER

You are the sole guarantor of safety. Correctly applying the safety instructions will not only 

serve to protect you but also those around you. Before using the machine, carefully study the 

instructions given in this manual as well as all the safety and instruction stickers affixed to the 

machine: consider them as an integral part of your safety programme. Also study all the usual 

work protection measures and above all, do not forget:
Safety depends on you. You can avoid accidents causing serious injury or death.

No.

Reference

Symbol

Meaning

1

ETIQ01-603

WARNING: DANGER

Read the instruction manual and safety instructions before 

starting up the machine and abide by them during operation.

2

ETIQ01-601

WARNING: DANGER

Stop the engine and remove the ignition key before carrying out 

servicing or repair operations.

3

ETIQ01-505

WARNING: DANGER

Stop the engine and remove the ignition key before carrying out 

servicing or repair operations.

4

ETIQ01-605

RISK OF CRUSHING

Keep away from the machine to avoid any risk of crushing.

Summary of Contents for 5 Series



































































































































Reviews:

No comments