manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 64 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 64

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

64

NOTT-GB-708-A

06/12/2019

6.4.4. Folding the extensions

IMPORTANT

To fold the extensions, ensure that the hydraulic sensors in the work, position are activated 

otherwise the folding system will not work.

IMPORTANT

The hydraulic sensors can only be activated if the roller arm cylinders are fully extended.

NOTT-0426

1

2

Fig. 46

No.

Description

1

Deactivated hydraulic sensor

2

Activated hydraulic sensor

Folding procedure

1 -  Actuate the roller arm cylinders to their maximum extent. This allows the rollers to be retracted within the 

machine as much as possible in their transport position . The rollers must therefore remain within the 

regulatory width (width of less than 2.98 m during transport).

2 -  Raise the discs to their maximum extent.
3 -  Actuate the trailed kit drawbar cylinders to their maximum extent.
4 -  Fold the extensions.

Summary of Contents for 5 Series



































































































































Reviews:

No comments