manualshive.com logo in svg

Agilent Technologies Magnis Dx NGS Prep System, User Manual

Share
Download
Agilent Technologies Magnis Dx NGS Prep System User Manual Download Page 48

Magnis and Magnis Dx NGS Prep System User Guide

48

A message box opens displaying the license agreement.

10

Read the license agreement, then press 

Accept

 to accept the terms.

The system begins the firmware update process. When the process is complete, the system 
automatically reboots with the new firmware version running on the touchscreen.

Download firmware from the Agilent website

1

From the Home screen, press 

Settings

.

The 

Settings screen

 opens.

2

Press 

System Settings

.

The 

System Settings screen

 opens.

3

Press 

Firmware Update

. 

The 

Firmware Update screen

 opens.

4

Select 

Online Update

. 

The screen displays the firmware update available from Agilent.

Figure 31

Firmware Update – Online Update selected

5

Press 

Update

.

A message box containing the license agreement opens.

6

Read the license agreement, then press 

Accept

 to accept the terms.

The system begins the firmware update process. When the process is complete, the system 
automatically reboots with the new firmware version running on the touchscreen.

Summary of Contents for Magnis Dx NGS Prep System

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands