Magnis and Magnis Dx NGS Prep System User Guide
52
Clean the barcode scanner
Agilent recommends avoiding all contact with the window of the barcode scanner. You can,
however, clean the window using the instructions below if the window becomes visibly dirty or if
the barcode scanner is not operating well.
1
Turn off the instrument at both the power button on the front and the power switch on the
back, and disconnect the power cord from the power supply.
2
Use a soft cloth or wipe moistened with water or a mild detergent-water solution to clean the
window of the barcode scanner. If you use a detergent-water solution, follow with cleaning
using a soft cloth moistened with water or 70% isopropyl alcohol.
Do not touch the window with anything other than the soft cloth or wipe that you are using for
cleaning.
3
Remove any remaining moisture with a dry, soft cloth or wipe.
4
Reconnect the instrument to power supply and turn on the power switch at the back of the
instrument.
CAUTION
Review
“Precautions to take when cleaning the system components”
before proceeding.
